The Bayor Tech Fuel Counter is a passive instrument that powers and interfaces with the Electronics International FT-60 Fuel Flow Transducer.
The Fuel Counter was designed for automotive endurance racing applications such as ChampCar, Lemons, Lucky Dog, etc. The fuel counter displays how much fuel has been pumped through the transducer(s). After installing the fuel counter, you should fill the tank as you would during a pit stop (most teams fill till overflow) and then pump the fuel out of the tank through the car’s fuel system. Record the number displayed on the fuel counter when the fuel pump starves. You have now determined the true “usable” fuel capacity of your car. Write this number on the dash. Throughout each stint you can use the fuel counter readout to estimate your fuel burn rate, optimize your pit strategy, and pit before you run out of gas. Forget the factory fuel gauge, the fuel counter can accurately determine fuel pumped through the transducer within 0.3 gallons (determined through on-track testing, 2 hour stints, 15 gallon tank, dual channel setup).
All FC-60 fuel counters are dual channel, but if you select dual or single channel I will include a pre-populated pigtail harness for that configuration. If you plan to source your own DT 12 pin connector and wire it up yourself, select the “no-harness” option.
Included:
- Fuel Counter (Bayor Tech designed PCB in 3D printed enclosure)
- Mounting bracket template
Optional:
- Pre-populated pigtail harness(DT06-12SA connector)
Not Included:
- Electronic International FT-60 Fuel Flow Transducer (need 2x if your fuel system is not returnless)